This sale has been split into two posts because the site only allows ten pictures per post.
The other sale post is HERE.
I purchased tgee’s Brutes and added one that I had for this sale. I priced these at 50% off the prices on Uline. If there were “cents,” I rounded down to the nearest dollar.
D. 32 G Brute with sight tube $21
Approximately 2 ¾ inches for the top edge is a 5/8 inch hole.
E. 32 G Brute with Sight Tube and Float Valve $21
Approximately 9 ½ inches from the top edge is a float valve
There also is a “V” notch in the lid:
F. 44 G Brute with Float Valve $35
Approximately 3 ½ inches from the top edge is a Kent Marine float valve. Note that because of this float valve (which sells for $20), I added $4 to the total price.
The lid has a rectangular notch about 3/8 inches wide:
SO THAT THERE IS NO CONFUSION, PLEASE REFER TO THE LETTER D – F FOR THE BRUTE(S) YOU ARE INTERESTED IN. Thanks.
The other sale post is HERE.
I purchased tgee’s Brutes and added one that I had for this sale. I priced these at 50% off the prices on Uline. If there were “cents,” I rounded down to the nearest dollar.
D. 32 G Brute with sight tube $21
Approximately 2 ¾ inches for the top edge is a 5/8 inch hole.
E. 32 G Brute with Sight Tube and Float Valve $21
Approximately 9 ½ inches from the top edge is a float valve
There also is a “V” notch in the lid:
F. 44 G Brute with Float Valve $35
Approximately 3 ½ inches from the top edge is a Kent Marine float valve. Note that because of this float valve (which sells for $20), I added $4 to the total price.
The lid has a rectangular notch about 3/8 inches wide:
SO THAT THERE IS NO CONFUSION, PLEASE REFER TO THE LETTER D – F FOR THE BRUTE(S) YOU ARE INTERESTED IN. Thanks.
