• Folks, if you've recently upgraded or renewed your annual club membership but it's still not active, please reach out to the BOD or a moderator. The PayPal system has a slight bug which it doesn't allow it to activate the account on it's own.

75g build gettin back into the hobby

Thanks to @richlada1971 hooking it up with a his old setup well most of it I decided to get back in the hobby. Here are some pics of my progress so far. Slowly but surely coming along. I got carried away with the sander and had to put 3/4 ply on top with some shims and some wood filler to get a nice lvl top.

Sorry pics for some reason didn’t post in order.
B33BE166-47DA-43E2-8CD4-8F2BCF286182.jpeg DEA74D14-A908-418C-AE1D-CF399150E28F.jpeg A4176CFE-12D1-4FB6-ADD1-F126D425BC49.jpeg 3F0C968E-D52B-4A85-AA5E-38B40751B855.jpeg A3FE79CB-4F71-4E67-9543-AA4DFB2C7315.jpeg 63338758-E18C-4907-9D41-CDFB48696CD0.jpeg 55167C9F-793C-48F0-83EA-38E4785B5B81.jpeg 2DBAB73C-2CB1-4D5D-9E5E-0EB4E7460870.jpeg
 
image.jpg RO/DI system is all here and now ready to be set up. I will be cutting a Tee in before the polisher and running that to my DI stages. So I have RO to the kitchen sink and RO to the DI which will eventually Teed too and ran directly to my ATO and water station in the garage.
 
6BB84586-6F09-4F87-A05F-796DF72F67BD.jpeg So I got my RO/DI system kinda setup right now I have it hooked to the garden hose but will be hard pipping it so it’s always hooked up. I’m getting 1 PPM coming into my DI canisters and 0 PPM coming out. I’ll also have the waste water plumbed into the waste lines but have a tee with 2 valves so I can also save it need be. Currently have my waste going into the bucket I’ll be using as a fresh water storage.
 
Top