-
Folks, if you've recently upgraded or renewed your annual club membership but it's still not active, please reach out to the BOD or a moderator. The PayPal system has a slight bug which it doesn't allow it to activate the account on it's own.
Baffles for sump
- Thread starter hurtback
- Start date
i used 1/4" glass on my currrent sump, the previous one i used 1/4" plexi
the class baffels look neater and bond a little better because the silicon only traps the baffel on the acrylic wher on the glass the silicone sticks to the glass better
But who else is looking under there, use whatever is more available
the class baffels look neater and bond a little better because the silicon only traps the baffel on the acrylic wher on the glass the silicone sticks to the glass better
But who else is looking under there, use whatever is more available
Silocone sticks better to glass than to plastic (acrylic, polywhatever). But saying that, the acrylic silcone work I;ve done have not been a problem. One word of caution, cut the acrylic a little undersized....it swells.
Cost wise, glass is cleaper. If you go with plastic, 1/8 inch is a bit too thin...it bows...so 1/4 would be better.
Cost wise, glass is cleaper. If you go with plastic, 1/8 inch is a bit too thin...it bows...so 1/4 would be better.
Im going to do a 10gl with glass next weekendhurtback said:
