BRS dual di canister water level

[Hallowhead]

Howdy,

Just went to install the dual di canister and I'm curious where the water level should be ?

I held my finger on the outlet till the entire outer chamber was filled but it quickly emptied.

The interior is filled and exterior is about half filled. Let me know

 

[DangerDave]

Crack it open while the waters running to push the air out then do the same for the other side.

 

[Hallowhead]

Crack it open while the waters running to push the air out then do the same for the other side.

So they should be filled ! Thanks !

 

[redfishbluefish]

Air in the canister is not an issue....just as long you have some water at the bottom. You don't need to bleed the air out.

 

[Hallowhead]

Air in the canister is not an issue....just as long you have some water at the bottom. You don't need to bleed the air out.

This is what I figured. I'm gonna try what Dave said and see if it helps If not whatever. It's producing 0tds