power supply for mp60

[thirty6]

Looking for the power supply to an mp60 (older model)

 

[mike devlin]

Go on eBay.. just get the off brand, it’s like 20 dollars for

 

[thirty6]

I’ll check. Thanks

 

[redfishbluefish]

I don't know if the MP60's take the same power supply as the 40's, but if they do, my last order came from here:

Amazon.com

You want to match voltage and at least the amps of the old one....higher amps is OK. Also, the plug end needs to match in size and location of +/-.

 

[redfishbluefish]

I just looked it up....it appears the 60's are 32 volts

 

[redfishbluefish]

This one should fit the bill:

https://www.amazon.com/KNACRO-Switching-100v-240v-Transformers-Interface/dp/B01HEQQ6C8/ref=sr_1_3?crid=2J155RTXLI4T4&dib=eyJ2IjoiMSJ9.wc0DBtw2h5QjLPswXTYtnTe3C4Je0QCd67uexG3BFOBFTCrUykYKVEn9EVHjgLw-8i2BmdxEn5nJWmYk4PyfEdBAKwiunI9iOhxjrDrT5BciPt5EXPZ8QWvdcqz7xEHj.M9VSBqip-sjiTqXzgL8Q_FaD1VL6r-6T_POyr64U-i4&dib_tag=se&keywords=KNACRO+32V%2F3A+Power+Supply&qid=1741186669&sprefix=knacro+32v%2F3a+power+supp%2Caps%2C937&sr=8-3

 

[thirty6]

appreciate it, thank you

 

[nvladik]

MP40s are also 32v, but come with 60w PSUs.

 

[nvladik]

This one should fit the bill:

https://www.amazon.com/KNACRO-Switching-100v-240v-Transformers-Interface/dp/B01HEQQ6C8/ref=sr_1_3?crid=2J155RTXLI4T4&dib=eyJ2IjoiMSJ9.wc0DBtw2h5QjLPswXTYtnTe3C4Je0QCd67uexG3BFOBFTCrUykYKVEn9EVHjgLw-8i2BmdxEn5nJWmYk4PyfEdBAKwiunI9iOhxjrDrT5BciPt5EXPZ8QWvdcqz7xEHj.M9VSBqip-sjiTqXzgL8Q_FaD1VL6r-6T_POyr64U-i4&dib_tag=se&keywords=KNACRO+32V%2F3A+Power+Supply&qid=1741186669&sprefix=knacro+32v%2F3a+power+supp%2Caps%2C937&sr=8-3

@redfishbluefish 60's use 2.5mm connectors? 40's are on 2.1mm.

 

[redfishbluefish]

MP40s are also 32v, but come with 60w PSUs.

I guess I should have clarified. Just like me, everything I have is old. I do not have any QD MP40's, but the 7 or 8 that I own, going back to 2002, are all 24 volts. Again, maybe the newer models are 32, but the older models are 24. Here's what you need to do....very simple....just match the volts, amps, barrel jack size and +/- location on the original power supply and you'll be just fine. Note amps on the replacement can be higher, but you don't want to go lower. As an example, if I remember correctly, if the old one is 24 volts, 3 amps, there is no problem getting a 24 volts, 5 amp.

@redfishbluefish 60's use 2.5mm connectors? 40's are on 2.1mm.

The link I provide comes with a 2.5mm barrel jack!

 

[nvladik]

I guess I should have clarified. Just like me, everything I have is old. I do not have any QD MP40's, but the 7 or 8 that I own, going back to 2002, are all 24 volts. Again, maybe the newer models are 32, but the older models are 24. Here's what you need to do....very simple....just match the volts, amps, barrel jack size and +/- location on the original power supply and you'll be just fine. Note amps on the replacement can be higher, but you don't want to go lower. As an example, if I remember correctly, if the old one is 24 volts, 3 amps, there is no problem getting a 24 volts, 5 amp.




The link I provide comes with a 2.5mm barrel jack!

Gotcha, thank you. Yes the new QD 40s are 32v 2.1mm jacks.