• Folks, if you've recently upgraded or renewed your annual club membership but it's still not active, please reach out to the BOD or a moderator. The PayPal system has a slight bug which it doesn't allow it to activate the account on it's own.

Red Slime & it's remover

Hi Guys
It's been a wile...

Well to begin I started all over. My 90 crashed about two Mos ago due to Power issues for 5 Days (I wasn't around when it happened).

So anyway, everything died, even Bristol worms, so I had to cycle the tank again.
After draining 1/2 of my water initially and several water changes later all if my levels are fine but I have been experiencing a red Algae problem.
It's my understanding that it is a bacterial algae, but other that that, I don't know much about it.

I recently added ultralife Red slime remover and was advised to shut down my skimmer wile the antibiotics take effect. After the 2nd dose 3 days later I called the company and they said to keep the skimmer on but turn it down.

We'll the skimmer removed it from the tank and I'm back to square 1.

Bottom line, I have plenty of flow (korilla 3 and two maxijet 600 (waiting for kit), my actinics come on at 7Am until 9:30PM my halides from 4:00PM to 9:00, I am using RO/DI as usual, and here are my levels.

Nitrite 0
Nitrate 0
Ammonia 0
PO4 0 (but using Phosguard)
Calcium 450
Mg 1400 or a little higher (even with water changes it stays high)
Ak 9 Dkh
Ph 8.4
Gravity 1.026
Temp 78 degrees

I am going to dose it again on Friday with Chemiclean.

Let me know what you think. It's probably covering 1/4 of my tank, and I can't take looking at it.

Thanks,

Erik R.
 
You talking about Cyano?.. I used to have em before on my starboard .. I never dose anything I just re-arranged my powerheads and siphon it and do some weekly waterchange. How old are your bulbs?... what kind of actinics you got?.. Hope someone can chime in and P04 might not be zero unless u tested it with hannah..
 
I have(2)130W PCs and 2-150 14k Hqi all from Current USA.

Yeah the PCs are at 15 Mos (shame on me). My P04 tests allways show zero so I started using phosguard a few mos ago (ordered my phosban reactor today).

Side note: Did you ever set up a new tank? I met you in Parsippany a few mos back.
 
I think you should change your lights ... the only tester I can say if you have a Po4 is the hannah. Mine always zero on salifert kit but a friend of mine let me borrow it it was .005 :-X...

No its still on my basement ... no time
 
Top