-
Folks, if you've recently upgraded or renewed your annual club membership but it's still not active, please reach out to the BOD or a moderator. The PayPal system has a slight bug which it doesn't allow it to activate the account on it's own.
where to get uni-seals??
- Thread starter kabal2
- Start date
reefsandrotts
NJRC Member
what are you looking to do with the seal?
D'oh,,,, I just noticed what you are doing.
You can get everything in one shot from McMaster Car
www.mcmastercarr.com
You can get everything in one shot from McMaster Car
www.mcmastercarr.com
pipe seals - catalog page - 3543
PVC gate valve - 398 - for the gate valve mod if you haven't done it - I highly recommend it!
Can you go straight in with the sedra pump or do you have to use an elbow? I found the perfect elbow at lowes. Screws right into the sedra and slip fitting on the other.
PVC gate valve - 398 - for the gate valve mod if you haven't done it - I highly recommend it!
Can you go straight in with the sedra pump or do you have to use an elbow? I found the perfect elbow at lowes. Screws right into the sedra and slip fitting on the other.
can be done real quick.....no charge if you bring it to me and buy the parts. I've already practiced on mine. We need to make sure how the pump is going to be angled. Look at www.asmskimmer.com. If you can go straight in with the pump then its a piece of cake. Also, how are you going to feed the skimmer?
Aquatic Eco Systems seemed to have the best price for them . Aquaticeco.com.
I've got two of the 1."" they were $2.50 each.
I have two of the 3/4" , they were $2.03. .
You might want to just order them, shipping was only $7. Or you can come get a couple of these for $2. each.
The drills weren't cheap, you need a 1-3/4" hole for the 1" UniSeal. That's the scariest part of this Mod, it's a pretty big hole in the side of your nice Skimmer. , but it does drill pretty easy, just when the drill breaks through the other side, you gotta be real careful as to not break the plastic. Do the drilling in the sink, while someone pours water on the drill bit.
Anyway, you are welcome to borrow these drills, or check Home Depot or Lowes, they both carry them, They are called Hole Saws.
I've got two of the 1."" they were $2.50 each.
I have two of the 3/4" , they were $2.03. .
You might want to just order them, shipping was only $7. Or you can come get a couple of these for $2. each.
The drills weren't cheap, you need a 1-3/4" hole for the 1" UniSeal. That's the scariest part of this Mod, it's a pretty big hole in the side of your nice Skimmer. , but it does drill pretty easy, just when the drill breaks through the other side, you gotta be real careful as to not break the plastic. Do the drilling in the sink, while someone pours water on the drill bit.
Anyway, you are welcome to borrow these drills, or check Home Depot or Lowes, they both carry them, They are called Hole Saws.