I need to clear this stuff out of my basement, so I’m selling all of it together as a single bundle.
One 44 gallon brute and lid. This is the heavy duty one that cost $60 new, plus $20 for the lid. Has a drilled hole near the top with a float switch mounted.
Two 32 gallon brutes with lids. Both have home-made level indicators attached (drilled holes with clear tubing running bottom to top attached to PVC fittings held in place with uniseals). Works great! One also has a float switch.
Two 20 gallon brutes with lids. One is drilled with 4 holes. The other has no holes.
One brute dolly, for use with any of the above.
Note, a couple of the lids have small notches cut in them.
Bunch of 1-1/2 inch PVC fittings. Includes a variety
of tees, wyes, elbows, caps, etc. Also includes a small number of 1-1/4 inch
pieces. A five gallon bucket full!
Bunch of 2 inch PVC tees and elbows.
Bunch of PVC unions and union ball valves.
Includes:
One 2 inch threaded union
One 1-1/2 inch ball valve with threaded union connections on both sides
One 1-1/2 inch ball valve with slip connections on both sides
One 1-1/2 inch ball valve with slip connections
A few 1 inch and 1-1/2 inch unions
Also includes a couple that have been glued and used, but could still be used
in the right place.
$100 for all, cash, in-person only. Must be picked up. Please bring a vehicle that can hold all the cans.
Let me know if there are any questions, or if additional pics are needed.
Thanks,
Tom
One 44 gallon brute and lid. This is the heavy duty one that cost $60 new, plus $20 for the lid. Has a drilled hole near the top with a float switch mounted.
Two 32 gallon brutes with lids. Both have home-made level indicators attached (drilled holes with clear tubing running bottom to top attached to PVC fittings held in place with uniseals). Works great! One also has a float switch.
Two 20 gallon brutes with lids. One is drilled with 4 holes. The other has no holes.
One brute dolly, for use with any of the above.
Note, a couple of the lids have small notches cut in them.
Bunch of 1-1/2 inch PVC fittings. Includes a variety
of tees, wyes, elbows, caps, etc. Also includes a small number of 1-1/4 inch
pieces. A five gallon bucket full!
Bunch of 2 inch PVC tees and elbows.
Bunch of PVC unions and union ball valves.
Includes:
One 2 inch threaded union
One 1-1/2 inch ball valve with threaded union connections on both sides
One 1-1/2 inch ball valve with slip connections on both sides
One 1-1/2 inch ball valve with slip connections
A few 1 inch and 1-1/2 inch unions
Also includes a couple that have been glued and used, but could still be used
in the right place.
$100 for all, cash, in-person only. Must be picked up. Please bring a vehicle that can hold all the cans.
Let me know if there are any questions, or if additional pics are needed.
Thanks,
Tom
