• Folks, if you've recently upgraded or renewed your annual club membership but it's still not active, please reach out to the BOD or a moderator. The PayPal system has a slight bug which it doesn't allow it to activate the account on it's own.

92g Corner Build

MadReefer

Staff member
NJRC Member
Moderator
Ate these pics better?
 

Attachments

  • 20190328_153540.jpg
    20190328_153540.jpg
    3.3 MB · Views: 49
  • 20190328_153535.jpg
    20190328_153535.jpg
    2.9 MB · Views: 49
  • 20190328_153521.jpg
    20190328_153521.jpg
    3.1 MB · Views: 44

MadReefer

Staff member
NJRC Member
Moderator
I believe it is and will double check tomorrow.
What about that 1st pic?

Someone else may have to by and give a second opinion.
 

ivanquezada

NJRC Member
I love corner tanks! Currently have a 54 corner. Looking forward to seeing it up and running


Sent from my iPhone using Tapatalk
 

MadReefer

Staff member
NJRC Member
Moderator
If it’s just a reflection. I feel the tank is safe. Chips don’t really effect tanks much. Just cracks. And I see no cracks

So took another look at the tank and that is not a crack. Just weird to describe as it black silicone and this is behind it looking clear. I checked and seems like a tight seal.
I tried to get more pics but nothing better than what I posted.
Not sure now if I should go for it or toss and cut my loses.
 
I truly believe you are fine. But why not set tank up somewhere safe like out side. Fill it. And see what happens. Be rough with it. Tap the glass and shake. If t holds under a little stress it will never let go under normal use. Plus you take two pieces of glass with a half inch space between them the Silicone sticks to glass so well that it will not separate. Despite a big gap like that. If no crack. You are good. Now if that was at the top and not in a corner. I would worry. Remember you also have the bottom glass holding the corner. Tanks just don’t separate from bottom corners
 

MadReefer

Staff member
NJRC Member
Moderator
I guess I have no choice. Will pull the bulk heads off and put a few inches of water in and see.
 

MadReefer

Staff member
NJRC Member
Moderator

diana a

Staff member
NJRC Member
Moderator
You might want to take a look at the sand that @Premiumaq carries. I have two bags of it. Once I upgrade to RR tank, I will be using what I have and ordering additional sand. It's really nice! Here is a video
 

DangerDave

NJRC Member
I like the crushed coral look, to me it makes it look like it’s closer to the surf zone.

Sorry don’t have any experience.

Dave
 

MadReefer

Staff member
NJRC Member
Moderator
Went to remove bulk heads but wrench was to small. Ran to Harbor Freight and picked up a bigger size wrench. Bulk heads are off and water added just enough to cover that anomaly.
so far no immediate leaks
 

MadReefer

Staff member
NJRC Member
Moderator
I thought about it but was up & running.
it's in my garage and the HOA doesn't allow water run off of any kind. Yes people actually drive or walk around to report you.
Guess they don't have a life so want to make others miserable.
 
Top