DIY Phosphat-e recipe

[DYIguy]

I can't seem to find it
TIA

 

[iTzJu]

per ChatGPT:

Making the 500 mL Solution​

1. Weigh out ~29.5 g of lanthanum chloride heptahydrate.
2. Place into a mixing container and add RODI water. Stir until completely dissolved.
3. Transfer to a graduated cylinder (or other accurate measuring vessel).
4. Top up with RODI water to exactly 500 mL total volume.

You now have ~500 mL of phosphate remover that, when used at the same dosage as Phosphāt‐E, should produce comparable results.

 

[DYIguy]

per ChatGPT:

Making the 500 mL Solution​

1. Weigh out ~29.5 g of lanthanum chloride heptahydrate.
2. Place into a mixing container and add RODI water. Stir until completely dissolved.
3. Transfer to a graduated cylinder (or other accurate measuring vessel).
4. Top up with RODI water to exactly 500 mL total volume.

You now have ~500 mL of phosphate remover that, when used at the same dosage as Phosphāt‐E, should produce comparable results.

Thanks, but I was looking for a simpler one- with Vodka, vinegar and RODI water, etc for a qt

 

[iTzJu]

Thanks, but I was looking for a simpler one- with Vodka, vinegar and RODI water, etc for a qt

do you mean nopox?

below is the recipe:
500ml vinegar (5%), 375 ml vodka (80 proof), and 125 ml RODI Water

Phosphate-E is a lanthanum chloride based po4 remover.