Hydrogen Peroxide *** The information contained here is subject to frequent changes as I experiment and learn more about the usefulness of H2O2 ***
What It Treats – Provides temporary relief for Marine Velvet Disease. After a 30 minute H2O2 bath, the fish should be transferred into a Quarantine Tank (QT) and treated with either copper or Chloroquine phosphate.
How To Treat – The following is needed:
Directions:
1. Prepare saltwater for the bath by having it set to the right temperature and heavily aerating it. You can accomplish the latter by running an airstone or pointing a powerhead towards the surface of the water for at least 1 hour (longer is better). Alternatively, you can use Display Tank (DT) water or even from your Quarantine Tank (QT) provided no medications/chemicals are present in the water.
2. Add saltwater (using measuring cup) to the large glass bowl. Keep track of exactly how much water is added – either in cups or ml. (Do this beforehand if preparing saltwater for the bath right in the glass bowl.) Make sure your fish has enough water to swim around and last for 30 minutes without aeration.
3. Discontinue all aeration before adding Hydrogen Peroxide to the water. Using a syringe or pipette, add 3% Hydrogen Peroxide as per dosing instructions below. Dip the tip below the waterline and spread the H2O2 throughout the water. (Do not allow any air/bubbles to enter the water at this point.) After dosing is complete, gently stir the water using a metal spoon. The reason you want to be careful not to create any gas exchange/aeration once the H2O2 has been added is to prevent the atoms from releasing their bond and becoming just oxygen + water.
Dosing instructions: To achieve ~ 150 ppm H2O2 add:
Pros – Effective, easy-to-source “pre-treatment” before fish is placed in QT with copper or Chloroquine. In this study, a single 30 minute treatment with 75 ppm hydrogen peroxide “greatly reduced” Velvet trophonts on the fish: (PDF) The Application of Hydrogen Peroxide as a Treatment for the Ectoparasite Amyloodinium ocellatum (Brown 1931) on the Pacific Threadfin Polydactylus sexfilis
Cons/Side Effects – Still experimental so side effects are not really known. It’s possible some fish may not tolerate this treatment. Avoid using H2O2 on fish with an open wound or obvious infection. Although H2O2 is an antiseptic, it has been found to slow the healing process and possibly worsen scarring by killing the healthy cells surrounding a cut.
*** Further reading on use of Hydrogen Peroxide for fish:
FA157/FA157: Use of Hydrogen Peroxide in Finfish Aquaculture (PDF: https://agrilifecdn.tamu.edu/fisher...-Hydrogen-Peroxide-in-Finfish-Aquaculture.pdf)
Hydrogen Peroxide - RTAW Reefpedia
Reefing The Australian Way Forums • View topic - Use of Hydrogen Peroxide as a disinfectant treatment
More info from the aforementioned study: https://www.academia.edu/23793309/T...n_the_Pacific_Threadfin_Polydactylus_sexfilis
What It Treats – Provides temporary relief for Marine Velvet Disease. After a 30 minute H2O2 bath, the fish should be transferred into a Quarantine Tank (QT) and treated with either copper or Chloroquine phosphate.
How To Treat – The following is needed:
- 3% Hydrogen Peroxide (USP grade) – available at most drugstores or Walmart
- Large glass bowl or container (Avoid using plastic buckets/containers)
- Syringe or pipette (for measuring out the H2O2) and measuring cup (for adding saltwater to the glass bowl)
- Metal spoon for mixing (NOT plastic)
Directions:
1. Prepare saltwater for the bath by having it set to the right temperature and heavily aerating it. You can accomplish the latter by running an airstone or pointing a powerhead towards the surface of the water for at least 1 hour (longer is better). Alternatively, you can use Display Tank (DT) water or even from your Quarantine Tank (QT) provided no medications/chemicals are present in the water.
2. Add saltwater (using measuring cup) to the large glass bowl. Keep track of exactly how much water is added – either in cups or ml. (Do this beforehand if preparing saltwater for the bath right in the glass bowl.) Make sure your fish has enough water to swim around and last for 30 minutes without aeration.
3. Discontinue all aeration before adding Hydrogen Peroxide to the water. Using a syringe or pipette, add 3% Hydrogen Peroxide as per dosing instructions below. Dip the tip below the waterline and spread the H2O2 throughout the water. (Do not allow any air/bubbles to enter the water at this point.) After dosing is complete, gently stir the water using a metal spoon. The reason you want to be careful not to create any gas exchange/aeration once the H2O2 has been added is to prevent the atoms from releasing their bond and becoming just oxygen + water.
Dosing instructions: To achieve ~ 150 ppm H2O2 add:
- 1.25 ml of 3% H2O2 per 1 cup of saltwater.
- 5 ml of 3% H2O2 per 1 liter of saltwater.
Pros – Effective, easy-to-source “pre-treatment” before fish is placed in QT with copper or Chloroquine. In this study, a single 30 minute treatment with 75 ppm hydrogen peroxide “greatly reduced” Velvet trophonts on the fish: (PDF) The Application of Hydrogen Peroxide as a Treatment for the Ectoparasite Amyloodinium ocellatum (Brown 1931) on the Pacific Threadfin Polydactylus sexfilis
Cons/Side Effects – Still experimental so side effects are not really known. It’s possible some fish may not tolerate this treatment. Avoid using H2O2 on fish with an open wound or obvious infection. Although H2O2 is an antiseptic, it has been found to slow the healing process and possibly worsen scarring by killing the healthy cells surrounding a cut.
*** Further reading on use of Hydrogen Peroxide for fish:
FA157/FA157: Use of Hydrogen Peroxide in Finfish Aquaculture (PDF: https://agrilifecdn.tamu.edu/fisher...-Hydrogen-Peroxide-in-Finfish-Aquaculture.pdf)
Hydrogen Peroxide - RTAW Reefpedia
Reefing The Australian Way Forums • View topic - Use of Hydrogen Peroxide as a disinfectant treatment
More info from the aforementioned study: https://www.academia.edu/23793309/T...n_the_Pacific_Threadfin_Polydactylus_sexfilis