I'm having a bit of an issue and could use a few opinions. I'm setting up my basement system and have water running but can't seem to bring up the temps. The system as of now is a 80 frag tank 65 gal refugium and 100gal stock tank. Total running is approximately 180gal. All tanks were filled straight from the rodi with cold water. All have been running at capacity for about 1week at 1.026 salinity. Ambient room temps are about 64*.
I currently have 1 300watt jäger in the stock tank in a high flow area and the highest temp I have recorded is 70.2*. More often then not the temp is about 69*. I would think that this heater could handle this. Am I wrong? Am I fighting uphill with the lower room temp. Or is there something wrong with the heater. Currently it is turned all the way up.
I fully intend to add heaters but was hoping to do so when I break down the 90gal.
Thanks in advance.
I currently have 1 300watt jäger in the stock tank in a high flow area and the highest temp I have recorded is 70.2*. More often then not the temp is about 69*. I would think that this heater could handle this. Am I wrong? Am I fighting uphill with the lower room temp. Or is there something wrong with the heater. Currently it is turned all the way up.
I fully intend to add heaters but was hoping to do so when I break down the 90gal.
Thanks in advance.