Mag scraper

[MadReefer]

What si everyone using to clean the glass? Trying to find a good scarper / razor combo.

 

[DYIguy]

I use a razor like this

https://www.amazon.com/Stainless-Scraper-Cleaner-Blades-Aquarium/dp/B07DB6S2WN/ref=sr_1_5?crid=1Q5RS6DXCTSLT&keywords=razor+glass+cleaner+fish+tank&qid=1687552772&sprefix=razor+glass+cleaner%2Caps%2C2310&sr=8-5

I also have this

https://www.amazon.com/Windbells-Magnetic-Aquarium-Scratch-Free-magnetizing/dp/B07S64G7JQ/ref=sr_1_7?crid=14T2PLD7THUEW&keywords=fish+tank+glass+cleaner+magnet+medium&qid=1687552957&sprefix=magnet+glass+cleaner+fish+tank%2Caps%2C464&sr=8-7

 

[MadReefer]

Thanks Chris. I was looking for combo item. I made a DIY holder from PVC for a single edge razor but not enough pressure to remove coralline. I have to hold the razor and stick my arm in the tank. I do have a old mag float for I use for normal algae.

 

[DEL]

I have the AlgaeFree Tiger shark since I needed something for a 3/4 glass. I've left it in the tank daily for about a year and a half now. I take it out only to clean it. Pricey but it's a quality piece. Looks nice too since it's wooden

 

[myrjon]

just used coral glue let dry 2 days -scrape - worked good.

 

[amado]

I am using the flipper max on my tanks. It works with glass and acrylic.
If you are going to reef a polooza mag float is going to have a new updated glass cleaner.

I also use this flipper platinum to get the tough algea.

 

[Boehmtown]

I used to use the flipper max with the scraper for a while. Then Switched to tunze with the plastic blade and use a handled scraper. Both ways are about as easy and time consuming and have about the same results. I just feel more comfortable with the tunze staying in my tank, seems built considerably better. And it does look better with a hand scraper the day I do it.

 

[MadReefer]

just used coral glue let dry 2 days -scrape - worked good.View attachment 51142View attachment 51143

That's what I was looking for. Where did you get that?

 

[myrjon]

Get a paint scraper from a hardware store and then I mag float scraper