DangerDave
NJRC Member
We’re you able to glue it and get it up and running?
-
Folks, if you've recently upgraded or renewed your annual club membership but it's still not active, please reach out to the BOD or a moderator. The PayPal system has a slight bug which it doesn't allow it to activate the account on it's own.
Marine Magic algae scrubber
- Thread starter Mark_C
- Start date
That's good. Hope it works out.
Oof, you'll receive the replacement in about 2 months.
DangerDave
NJRC Member
Nice, glue up the original and now you have two!
Not that easy. He took this holder and drilled two holes through a piece of acrylic he bent to a certain angle and secured with plastic screws. I then glued it to my Mag Float.
After many years of use the acrylic part snapped.
Edited.
Attachments
@Mark_C mine finally showed up. Guess I got lucky, it's in good condition. One side of the algae sheet had come loose, but a dab of glue fixed that. One comment though, it is definitely loud. Wish I opted for that "silencer". But nothing I can't rig up in the tank. Going to let it run for a bit before I do any sort of modifications to it.
I know! Between his pictures, and then your pictures. I was expecting the worst. All amped up and ready to write some hate mail and angry emojis. But it came out alright.
Main concern I had on the second unit, which arrived OK, was flow, as water was just going over the top mostly.
I dropped the long tube inside the unit, ran it over the top of the screen, and down the far side.
Seems to work. I’m in major tank changes now so hard to tell how well yet.
Also, mine is pretty quiet, you can hear it but you have to be within 3-5’ of the tank.
I dropped the long tube inside the unit, ran it over the top of the screen, and down the far side.
Seems to work. I’m in major tank changes now so hard to tell how well yet.
Also, mine is pretty quiet, you can hear it but you have to be within 3-5’ of the tank.
Last edited: