Possible emergency - Radion G3s

[Mark_C]

So, came home today to one of my G3s out.
Both are Mobius chipped.
Both on same Mobius program.

The one in question's LEDs 'blinks' once in a while.
All LEDS seem to be functioning when it does.

If I try to restart the program in Mobius it works for a second, then dims and goes back to the occasional blink.
If I hit any of the 3 buttons on the top it works for a second, then dims and goes back to the occasional blink.

I swapped profiles in Mobius, nada.
I made new Mobius profiles, nada.

Changed power supplies. Same as above.
Factory reset. Same as above.
Powered down 10 mins and turned back on. Same.

So, I've got a light that is getting power.
All the LEDs are intact and functioning.
No water splashes or trauma.
The power brick is OK.
Yet, the most it gives me on turn on is a second or two of light before it dims out.
It seems like it wants to work but is being held back.

Anyone experience this?
Could something like the fan be blown and its giving negative feedback?

Any help appreciated.

 

[MadReefer]

I remember seeing bunch of posts on R2R, may want to give it a view.

 

[redfishbluefish]

Check your fan. If the fan isn't working, the lights won't work. Replace the fan.

 

[Mark_C]

Thanks guys. Was hoping there might be a simpler solution. Seems not the case.