Pump question

[ecam]

I need a pump to go from one room in the basement to the closet sump.... the height is about 9 ft up; 20-30ft across the room then into the sump.

here is the setup... I have 1/2" tubing going up and over into the closet i then convert to 1/4" tubing so that I can hook it up to the float valve in the ATO container......

I was using a Mag7 but now its not working (stops moving water around the 7ft mark). Im trying to stay internal.... Which pump would you recommended for me to try?

 

[Raffle King]

A quiet one pump might it for u Edwin or check the impellar on the mag 7 that should pump up that far

 

[redfishbluefish]

The frictional head loss through 1/2 inch tubing is pretty high. Might be better off using 3/4 or 1 inch rigid, at least up to when gravity will start to take it "down hill."

 

[saltkreep88]

Is this for a ato? Of so buy an avast diaphragm pump. Uses WAY less power and can handle it no problem.

 

[redfishbluefish]

Holy crap!!! When I saw you recommended a diaphragm pump, I'm thinking, "That's not going to work." I just looked up that pump......and it states that it will pump up to 130 feet high! I'm impressed. HERE's the link. Good stuff Joe.

 

[saltkreep88]

I use one and it is STRONG

 

[ecam]

might be the answer.... let me look into this... thanks guys
'