• Folks, if you've recently upgraded or renewed your annual club membership but it's still not active, please reach out to the BOD or a moderator. The PayPal system has a slight bug which it doesn't allow it to activate the account on it's own.

Question about hanging Hybrid light

So I just ordered the 48” aquatic life hybrid light to go with a Kessil Ap700 and 2 hydra 26’s. I plan on hanging from the ceiling. How heavy is the fixture and should I reinforce ceiling with plywood to hang everything or will good sheet rock anchors hold everything up? Unfortunately my joists don’t line up where I need them to to center the light over the tank
 

eholceker

NJRC Member
So I just ordered the 48” aquatic life hybrid light to go with a Kessil Ap700 and 2 hydra 26’s. I plan on hanging from the ceiling. How heavy is the fixture and should I reinforce ceiling with plywood to hang everything or will good sheet rock anchors hold everything up? Unfortunately my joists don’t line up where I need them to to center the light over the tank

Sheet rock anchors will work fine.
 

MadReefer

Vice President
Staff member
NJRC Member
Moderator
I would feel more comfortable with a piece if wood. This is what I did.
 

Attachments

  • 20220205_151953.jpg
    20220205_151953.jpg
    3.2 MB · Views: 9

ecam

Administrator
Staff member
Board of Directors
Officer Emeritus
NJRC Member
Moderator
Sheet rock anchors for ceiling is what you need.
I put them in 4 years ago and have hung Ati, radions (3x) with bar and reefbrites. Still hanging


corrected pic
 
Last edited:
Yeah I’m gonna see if I can do it with anchors to keep it “clean” if I hook everything up and lift the fixture and it feels like it might be too much then I will do something with wood on top. I am currently using this anchor for my AP700.
 

Attachments

  • 5137E772-D2D1-415C-A6BE-C1CFB3A07831.jpeg
    5137E772-D2D1-415C-A6BE-C1CFB3A07831.jpeg
    238.5 KB · Views: 0
Well light is hung using the “flip toggles” now all I need are the bulbs.
also need to lower AP700 with a spacer since the cord hits the fixture and is too tight.
 

Attachments

  • F21A3ADE-AC09-46E6-8D76-537C2764040B.jpeg
    F21A3ADE-AC09-46E6-8D76-537C2764040B.jpeg
    1.1 MB · Views: 7
  • 515EEF80-ACD0-498C-8A91-0D01BE7841BF.jpeg
    515EEF80-ACD0-498C-8A91-0D01BE7841BF.jpeg
    1.2 MB · Views: 7
  • 4C58DD74-4784-45C4-82DB-D5BDB3F1E1E5.jpeg
    4C58DD74-4784-45C4-82DB-D5BDB3F1E1E5.jpeg
    428.9 KB · Views: 7
Top