malulu
NJRC Member
		Since the October last year, i installed the refugium (30g + 100g) and sump (100g) in the basement area, the tank condition are now getting very good (see picture below), but for the pass few weeks, the weather are getting hot, and i started to noticed the damp/moisture building up in the basement, so i am looking to install an exhause fan ASAP. (on the top right cornor in the picture)
the questions are:
- should i use something like this (installed to outside with a duct pipe right on top of the refugium) details product info:
http://www.westsidewholesale.com/index.cgi?CATEGORY=635&HN_SessionID=@@@@1179342099.25195@@@@&pid=972070
	
	
	
		
		
		
			
		
		
	
	
		 
	
- or, something like this? detail product info
http://www.energyfederation.org/consumer/default.php/cPath/30_406_103
	
	
	
		
		
		
		
	
	
		 
	
- since the IWAKI pump are sort of noisy anyway, i am not too concern of the nose level of the exhaust fan (ofcouse the quieter the better)
- would something about 150 CFM be enough?
thx all for your advise.
	
	
	
		
		
		
		
	
	
		 
	
	
		
			
		
		
	
			
			the questions are:
- should i use something like this (installed to outside with a duct pipe right on top of the refugium) details product info:
http://www.westsidewholesale.com/index.cgi?CATEGORY=635&HN_SessionID=@@@@1179342099.25195@@@@&pid=972070
 
	- or, something like this? detail product info
http://www.energyfederation.org/consumer/default.php/cPath/30_406_103
 
	- since the IWAKI pump are sort of noisy anyway, i am not too concern of the nose level of the exhaust fan (ofcouse the quieter the better)
- would something about 150 CFM be enough?
thx all for your advise.
 
	 
					
				
 
 
		 
 
		