Hi everyone. Firstly, thanks for all the comments and advice you have provided on my first thread on these forums. I spent a long time looking for 2 forums where I could call home because from previous experience, I believe that having access to grounded knowledgeable folks is an important part of this hobby.
Whilst I am not yet ready for a “Tale of The Tank” thread I am getting close, my goal this time around is to take things slowly and get them right the first time, plus a whole lot has changed since I had a marine tank all those years ago.
My mind is made up on the brand of tank. It will be a Redsea Reefer. What I am unsure of at this point in time is the size, the good thing is I have narrowed it down to the two below with a bit of a swing toward the 425XL:
What I need help with now is the recommended components to get the tank up and running and by this I mean I will have sand, rock, water and a couple of fish. What I don’t need right now are any reactors, dosing equipment, algae scrubber etc etc, that can all wait. So, what comes immediately to mind are the following items:
As always your help and advice is very much appreciated.
Whilst I am not yet ready for a “Tale of The Tank” thread I am getting close, my goal this time around is to take things slowly and get them right the first time, plus a whole lot has changed since I had a marine tank all those years ago.
My mind is made up on the brand of tank. It will be a Redsea Reefer. What I am unsure of at this point in time is the size, the good thing is I have narrowed it down to the two below with a bit of a swing toward the 425XL:
- Redsea Reefer 350
- Redsea Reefer 425XL
What I need help with now is the recommended components to get the tank up and running and by this I mean I will have sand, rock, water and a couple of fish. What I don’t need right now are any reactors, dosing equipment, algae scrubber etc etc, that can all wait. So, what comes immediately to mind are the following items:
- Lights
- Heater(s)
- Skimmer
- Skimmer Pump
- Return Pump
- Tank pumps for flow (Powerheads/Wave Machine)
- Controller unit (something that does it all is preferable)
- R/O Machine
As always your help and advice is very much appreciated.