ro-di upgrade

[myrjon]

i have a smart reef ro di 75 gph
is this correct for a 150 gph upgrade . bought upgrade and really no change . water pressure is good . also just changed inlet from piercing the water line to one that is inline for better flow this is how my setup is now .is this right?? see attached pic

 

[mnat]

My 180 follows the exact same path, I just have an extra DI cartridge.

 

[myrjon]

i dont know .thought i was going to cut time it took to fill a 35 gal brute. also tryed to run without flow Restrictor and water just poured out of the waste tube..

 

[redfishbluefish]

If this helps, here is a video from BRS that shows how to hook it up:

http://cdn.bulkreefsupply.com/media...Kit_Installation_Demo_-_Bulk_Reef_Supply_.mp4

 

[Fish Brain]

There should be no flow restrictor between the two membranes. The waste out from the first should go right into the input of the second.


Sent from my iPhone using Tapatalk

 

[myrjon]

just for fun i pulled off this little restrictor that goes between the 2 membraines .not good waste water line went max output ,drip drip from good water line . With flow restrictor (see pic)took like 12 hours to get 35 gallons . just now moved restrictor to drain line , seems better , need to test

 

[Fish Brain]

Also, what exactly is your pressure? Are you running a booster pump?


Sent from my iPhone using Tapatalk

 

[Fish Brain]

You should have one 75GPD (should say 600 or 800) flow restrictor after the second membrane.


Sent from my iPhone using Tapatalk

 

[myrjon]

not sure of water pressure no booster pump moved restrictor to waste after 2nd membrane (1/2 hour for 1 gallon)