• Folks, if you've recently upgraded or renewed your annual club membership but it's still not active, please reach out to the BOD or a moderator. The PayPal system has a slight bug which it doesn't allow it to activate the account on it's own.

RODI Buddy

MadReefer

Vice President
Staff member
NJRC Member
Moderator
I received this today. I want to start making water for a change this weekend. It comes with a faucet adapter but it's to big for my faucet but fits the one outside for my garden hose. What do I need to fit this on my kitchen sink? Pics of part to follow; have to load from phone.
 

Attachments

  • 20180405_163702-1.jpg
    20180405_163702-1.jpg
    601 KB · Views: 8
  • 20180405_163711-1.jpg
    20180405_163711-1.jpg
    169 KB · Views: 8

diana a

Staff member
NJRC Member
Moderator
IMG_2302.JPG take a photo to lowes and they can get you the right adapter. Here is the adapter I got with mine from BRS
 

Mark_C

Staff member
Officer Emeritus
NJRC Member
Moderator
Hallelujah!
Just be sure with the RO buddy that you push the tubes into the connectors tightly. You should feel a second sort of sliding before it fully sets, then gently pull a bit and place ring washer on.
I had a leak and the tube not being set correctly on set up was the cause.
 

MadReefer

Vice President
Staff member
NJRC Member
Moderator
Thanks for the tip Mark. I checked Lowe's and Homedepot sure and did not see anything that would work. Supposed to be 50 degrees tomorrow so will start making water outside.
 

ecam

Administrator
Staff member
Board of Directors
Officer Emeritus
NJRC Member
Moderator
bulk reef supply and Air water and ice would have that part
 

diana a

Staff member
NJRC Member
Moderator
Do you have a plumbing store nearby? If not just ordered the part from BRS
 
1522976864217835639633.jpg this is how I did mine in my laundry room it's just Y you would use on your garden hose outside with the shut off valve for each side. Got it at Lowe's. Oneside is rodi and the other is my washing machine.
 

MadReefer

Vice President
Staff member
NJRC Member
Moderator
Phil, it's to bug for the faucet. Think I found one in Amazon.
Thanks
 

diana a

Staff member
NJRC Member
Moderator
the second one. if you decide on this one, BRS has it for $10.99 with free shipping
 

MadReefer

Vice President
Staff member
NJRC Member
Moderator
Flushing out the unit now and should be making water in about 30mins.
 

MadReefer

Vice President
Staff member
NJRC Member
Moderator
Water params:
Tap - 160
RO - 2
RODI - 30

I don't understand why it jumped to 30. Did I not let the DI resin flush enough?
 

MadReefer

Vice President
Staff member
NJRC Member
Moderator
I took the hose and put it into a glass directly and tested and it's 0.
I assume that the cartridge did not filter enough at first or its the bucket. I scoped some water from the plastic bucket when I tested before.
Thanks everyone seems I'm good now.
 
Top