Rodi questions

[Marklugo23]

Didn’t realize it. TDS read 10. So i changed my filters not membrane. Now i read 3-4 about on The tds meter. Membrane was changed about 3-4 months ago. Shouldn’t it read lower?
I have another ro system. Could i hook the two together to get more life out of it. It’s a 100gpd system 5 stage. I think barracuda

 

[amado]

some times you have to flush the system. let it run until its at 0

 

[Marklugo23]

some times you have to flush the system. let it run until its at 0

I just checked it after running for 20min. And it read 0-1

 

[amado]

Nice good

 

[Marklugo23]

Would adding another membrane to my ro system help with the water quality. Or should i add another ro unit so i will have two running.

 

[Justin]

Your getting 0 to 1 after the membrane or after the di?

 

[myrjon]

my tds was 2 (like to catch early) changed bottom 3 sediment / carbon / di resin. this alone brought tds to 0 plus i have 2 Filmtec Reverse Osmosis Membrane .

 

[amado]

Zero tds is zero so if you are getting zero you don’t need to add anything. If you are not getting zero but your number is less than 10 tds then I would flush the system until you get zero. If you can’t get zero then I would change my filter cartridge to a higher grade filtration filters and it that doesn’t work. BRS sells
An upgrade kit that you can add to most RODi and it will double your production and lower your waste.

Water Saver Upgrade Kit

Why does BRS recommend this? Water Saving Upgrade Kits are probably our most recommended RODI upgrade. If you have proper pressure (65+ PSI) we highly recommend installing the kit, because it will produce water twice as fast as a standard 75 GPD or 100 GPD membrane while cutting the amount of...

www.bulkreefsupply.com

 

[DangerDave]

zero is good.