Started the day picking up a light for his tank at 7:45 this morning ( thanks MrX ) than his travel hockey game (won) then Home Depot for wood and back home to start the build with his help, and he did help out a lot.. So I decided to make the stand 6" wider than the tank and 5" deeper.(tank 19"x 19 1/2" ) cut all the wood and screwed it all together with coated galvinized screws.i let my son put most of the screw in and measured all the pieces with a like help from dad (wink ). And then cut a plywood to size and attached to stand. All done in 2 hrs not to bad!! Well almost I still have to put trim on it but he wanted to paint it, the wife wanted stain but lost the fight. So I also decided to add a little character to his stand and drew a shark on the side and cut it out with a jig saw, I plan on putting a piece of glass on in from the inside and I light to make it stand out, plan on doing something on the doors when I build them I will post those pictures when I finish it .He choose the design,,,