-
Folks, if you've recently upgraded or renewed your annual club membership but it's still not active, please reach out to the BOD or a moderator. The PayPal system has a slight bug which it doesn't allow it to activate the account on it's own.
Tank birthday and I'm a Geezer
- Thread starter Paul B
- Start date
Paul B
NJRC Member
A couple of days ago I went to my pain manager Doctor. She is a very good Doctor and looks a Greek Goddess but of course that had nothing to do with me going to her. She is one of my wife's doctors and I just went to her through osmosis.
I am very prone to trigger finger and had 9 of my fingers operated on for that. (It's common in electicians that worked hard and didn't sit around all day drinking coffee) If you don't know what that is, it's when you bend your finger while for instance brushing your teeth, putting on your socks or trying to coax one of your hermit crabs out from behind a shoe that you inadvertently dropped in your tank and you want to take a picture of it. The crab not the shoe which you feel looks kind of cool.
Anyway, you can't straighten out your finger unless you put it in a vise and pull very hard as you are screaming like you just sat on fire coral while wearing a Speedo.
So I went to her for some Cortisone shots which is a miracle drug and I wish I had enough of it to take a bath in.
In her office there was the Doctor, a very young female "Nurse, Assistant, or interior decorator" and a young man in his 20s who looked like he was always in pain or scared even though I was on the table.
The Doctor took the needle and said this is a very painful shot. I said I know as I probably had 10 of them before but I am not a Sissy.
She gave me 3 shots in 2 fingers and I kind of made a face as it was a little painful but it's not me to scream or lay on the floor screaming for Beyonce while kicking my feet against the walls.
After it she said, I'm sorry I know that was painful and she told the guy to get me a glass of water. I stopped him and said, "I don't need water for some silly shot, thats for wimps". It's just pain. The Doctor said, they don't make Men like me any more as most of them would faint. I'm sure they would as "men" today are not like Men used to be years ago, especially in my Fathers day when Men were Men and not little scared babies. I wish we would bring back the draft.
I am very prone to trigger finger and had 9 of my fingers operated on for that. (It's common in electicians that worked hard and didn't sit around all day drinking coffee) If you don't know what that is, it's when you bend your finger while for instance brushing your teeth, putting on your socks or trying to coax one of your hermit crabs out from behind a shoe that you inadvertently dropped in your tank and you want to take a picture of it. The crab not the shoe which you feel looks kind of cool.
Anyway, you can't straighten out your finger unless you put it in a vise and pull very hard as you are screaming like you just sat on fire coral while wearing a Speedo.
So I went to her for some Cortisone shots which is a miracle drug and I wish I had enough of it to take a bath in.
In her office there was the Doctor, a very young female "Nurse, Assistant, or interior decorator" and a young man in his 20s who looked like he was always in pain or scared even though I was on the table.
The Doctor took the needle and said this is a very painful shot. I said I know as I probably had 10 of them before but I am not a Sissy.
She gave me 3 shots in 2 fingers and I kind of made a face as it was a little painful but it's not me to scream or lay on the floor screaming for Beyonce while kicking my feet against the walls.
After it she said, I'm sorry I know that was painful and she told the guy to get me a glass of water. I stopped him and said, "I don't need water for some silly shot, thats for wimps". It's just pain. The Doctor said, they don't make Men like me any more as most of them would faint. I'm sure they would as "men" today are not like Men used to be years ago, especially in my Fathers day when Men were Men and not little scared babies. I wish we would bring back the draft.
reefsandrotts
NJRC Member
I currently have 4 torn tendon sheaths which caused me to have trigger fingers. It's very interesting what happens when im pruning someone's shrubs and they decide to lock up.A couple of days ago I went to my pain manager Doctor. She is a very good Doctor and looks a Greek Goddess but of course that had nothing to do with me going to her. She is one of my wife's doctors and I just went to her through osmosis.
I am very prone to trigger finger and had 9 of my fingers operated on for that. (It's common in electicians that worked hard and didn't sit around all day drinking coffee) If you don't know what that is, it's when you bend your finger while for instance brushing your teeth, putting on your socks or trying to coax one of your hermit crabs out from behind a shoe that you inadvertently dropped in your tank and you want to take a picture of it. The crab not the shoe which you feel looks kind of cool.
Anyway, you can't straighten out your finger unless you put it in a vise and pull very hard as you are screaming like you just sat on fire coral while wearing a Speedo.
So I went to her for some Cortisone shots which is a miracle drug and I wish I had enough of it to take a bath in.
In her office there was the Doctor, a very young female "Nurse, Assistant, or interior decorator" and a young man in his 20s who looked like he was always in pain or scared even though I was on the table.
The Doctor took the needle and said this is a very painful shot. I said I know as I probably had 10 of them before but I am not a Sissy.
She gave me 3 shots in 2 fingers and I kind of made a face as it was a little painful but it's not me to scream or lay on the floor screaming for Beyonce while kicking my feet against the walls.
After it she said, I'm sorry I know that was painful and she told the guy to get me a glass of water. I stopped him and said, "I don't need water for some silly shot, thats for wimps". It's just pain. The Doctor said, they don't make Men like me any more as most of them would faint. I'm sure they would as "men" today are not like Men used to be years ago, especially in my Fathers day when Men were Men and not little scared babies. I wish we would bring back the draft.
Paul B
NJRC Member
So the parking light burnt out on my Jeep Renegade. Not a big deal and when I used to be a mechanic for General Motors I could change this in 30 seconds. Of course I was in my 20s then and much more limber. Now to stick my head under the car is much more of a challenge.
To get to this thing you have to turn the wheels all the way one direction and remove a silly plastic plate in the wheel well.; Thank God for that or else you would have to remove the engine.
I jacked up the front end just so I didn't have to squeeze my almost 75 year old body under the car to much and I can just about see the bulb socket through the little access hole. I stick my arm in there to touch the back of the socket but in my 20s I must have had another elbow in between my existing elbow and wrist as it is not the easiest thing to reach.
I can touch it with two fingers but two old fingers aren't going to be able to turn the thing so it can be removed. I twist and turn while doing a lot of loud grunting and finally get the thing out.
I look at it and it is yellow. The turn signal light bulb is yellow and this is supposed to be white....So it is the wrong bulb. It's the next one in the same housing but a little farther away. I looked around to see if I could find someone with a longer arm, maybe Spiderman but he wasn't around. Of course not!
I took off my shirt thinking that 1/16th of an inch material in my New Jersey Reefers T shirt may give me a tiny bit more reach. I know, it is silly. But it worked. I also had to grease up my arm with some Coppertone to get it all the way up in there and scream a little as my two fingers snapped the thing out.
I look at it and this is the same old fashion regular light bulb that we used on cars in the 60s. You would think that in this day they would have at least upgraded the bulb to LEDs. The replacement bulbs are LEDs.
I stick the new bulb in the socket and again look around for Spiderman to put it back in but he still isn't around. More grunting, screaming and Coppertone and I get it in and turn it on. It works....... It is a nice bright white but the one on the other side is much more yellow so I have to change that also. I wasn't happy and I am not speaking to Spiderman.
To get to this thing you have to turn the wheels all the way one direction and remove a silly plastic plate in the wheel well.; Thank God for that or else you would have to remove the engine.
I jacked up the front end just so I didn't have to squeeze my almost 75 year old body under the car to much and I can just about see the bulb socket through the little access hole. I stick my arm in there to touch the back of the socket but in my 20s I must have had another elbow in between my existing elbow and wrist as it is not the easiest thing to reach.
I can touch it with two fingers but two old fingers aren't going to be able to turn the thing so it can be removed. I twist and turn while doing a lot of loud grunting and finally get the thing out.
I look at it and it is yellow. The turn signal light bulb is yellow and this is supposed to be white....So it is the wrong bulb. It's the next one in the same housing but a little farther away. I looked around to see if I could find someone with a longer arm, maybe Spiderman but he wasn't around. Of course not!
I took off my shirt thinking that 1/16th of an inch material in my New Jersey Reefers T shirt may give me a tiny bit more reach. I know, it is silly. But it worked. I also had to grease up my arm with some Coppertone to get it all the way up in there and scream a little as my two fingers snapped the thing out.
I look at it and this is the same old fashion regular light bulb that we used on cars in the 60s. You would think that in this day they would have at least upgraded the bulb to LEDs. The replacement bulbs are LEDs.
I stick the new bulb in the socket and again look around for Spiderman to put it back in but he still isn't around. More grunting, screaming and Coppertone and I get it in and turn it on. It works....... It is a nice bright white but the one on the other side is much more yellow so I have to change that also. I wasn't happy and I am not speaking to Spiderman.
Paul B
NJRC Member
MadReefer, I was a mechanic in 1968 and 69 for oldsmobile and I know what you mean
(Thats the year Toronado came out and the Oldsmobile 442 was my favorite car)
Everything came out with a regular phillip screwdriver. I think with a screwdriver and pliers I could take the engine out without even getting dirty.
There are no screws on a car any more and if there are, there is a "special" tool to remove them because God Forbid they use a phillip screw. What really drives me crazy is that many of the screws are not SAE American threads or Metric. They are somewhere in the middle what I like to call "The Fusion Zone" so you need that exact screw or you have to drill it out , tap it and put in a normal screw.
I am trying to find something with the same thread as the lug bolts on the wheels on my Jeep. It doesn't exist as it is a "proprietary" thread. Like Really!!!. Whats wrong with a normal thread? Would the wheel fall off if it had a normal lug nut? I don't see wheels flying off older cars with normal threads, do you?
To change a tire on my Jeep, first of all I can't lift it any more but I am old and I remember carrying two of them at a time years ago. But the hub of the wheel doesn't have studs sticking out like cars used to have. Now there are just holes so you have to lift the 100lb tire with one hand (like thats going to happen), then line up the 5 holes with the wheel while you try to screw in the lug bolt.
I want a threaded rod about 3" long so I can screw that in to line it up and hang the tire on it so I can screw in the rest of the bolts. It would be to easy for them to supply one of them to you when you buy the car because that would cost about two bucks,
I use a wooden dowel but a threaded stud would be easier. There is no such threaded rod because of the Proprietary thread. Like really! Drives me crazy.
I have to go to a junkyard and buy 5 lug studs, cut the head off and file a screw slot in it which is ridiculous and I hate stupidity.
(Thats the year Toronado came out and the Oldsmobile 442 was my favorite car)
Everything came out with a regular phillip screwdriver. I think with a screwdriver and pliers I could take the engine out without even getting dirty.
There are no screws on a car any more and if there are, there is a "special" tool to remove them because God Forbid they use a phillip screw. What really drives me crazy is that many of the screws are not SAE American threads or Metric. They are somewhere in the middle what I like to call "The Fusion Zone" so you need that exact screw or you have to drill it out , tap it and put in a normal screw.
I am trying to find something with the same thread as the lug bolts on the wheels on my Jeep. It doesn't exist as it is a "proprietary" thread. Like Really!!!. Whats wrong with a normal thread? Would the wheel fall off if it had a normal lug nut? I don't see wheels flying off older cars with normal threads, do you?
To change a tire on my Jeep, first of all I can't lift it any more but I am old and I remember carrying two of them at a time years ago. But the hub of the wheel doesn't have studs sticking out like cars used to have. Now there are just holes so you have to lift the 100lb tire with one hand (like thats going to happen), then line up the 5 holes with the wheel while you try to screw in the lug bolt.
I want a threaded rod about 3" long so I can screw that in to line it up and hang the tire on it so I can screw in the rest of the bolts. It would be to easy for them to supply one of them to you when you buy the car because that would cost about two bucks,
I use a wooden dowel but a threaded stud would be easier. There is no such threaded rod because of the Proprietary thread. Like really! Drives me crazy.
I have to go to a junkyard and buy 5 lug studs, cut the head off and file a screw slot in it which is ridiculous and I hate stupidity.
Paul B
NJRC Member
I feel a rant coming so don't read this. I just go nuts when I see bad engineering. I love when I see something designed correctly. That is beauty to me. I can sit for an hour and just stare at a set of rear differential gears in the rear axle of a car. That design has remained almost exactly the same as when Henry Ford sat with Firestone and were building cars. It's the same because it was simple and it worked. It worked perfectly and I can count on one hand how many times I have seen one of those fail in the 60 or so years I have been working on cars.
I love it when I go to a "good" hardware store (Not Home Depot) and just smell the hardware. A gearhead can smell good metal hardware.
The "screws" you find in a cheap box store are built almost 100% in some foreign country with dubious metals that are not good enough for any serious project. You can tell by the heads of screws which are a combination of phillips and slot so neither screwdriver works really well. A good piece of hardware will always be either slotted, philip, Torx or allen. A real gearhead can also tell by the color of the metal if it is really steel or a combination of iron, "white metal", aluminum or chewing gum. Even the "Hardened" bolts in a box store are very sub standard as are the drill bits.
My Daughter recently bought me a very large box of about 200 drill bits. They were listed as American, Titanium drill bits. They are actually regular, bits from China and really good for drilling into butter or cottage cheese. They will work in steel, "once".
Using a real titanium bit from America, which is as rare as finding a duck billed platypus in the Central Park Lake will drill through anything but that 1/4" bit may cost eight or ten bucks. A quarter inch bit from Home Depot is probably a dollar forty nine for a reason.
If you want a really good bit, you have to find an American made Cobalt bit. But you may find that Platypus first.
I love it when I go to a "good" hardware store (Not Home Depot) and just smell the hardware. A gearhead can smell good metal hardware.
The "screws" you find in a cheap box store are built almost 100% in some foreign country with dubious metals that are not good enough for any serious project. You can tell by the heads of screws which are a combination of phillips and slot so neither screwdriver works really well. A good piece of hardware will always be either slotted, philip, Torx or allen. A real gearhead can also tell by the color of the metal if it is really steel or a combination of iron, "white metal", aluminum or chewing gum. Even the "Hardened" bolts in a box store are very sub standard as are the drill bits.
My Daughter recently bought me a very large box of about 200 drill bits. They were listed as American, Titanium drill bits. They are actually regular, bits from China and really good for drilling into butter or cottage cheese. They will work in steel, "once".
Using a real titanium bit from America, which is as rare as finding a duck billed platypus in the Central Park Lake will drill through anything but that 1/4" bit may cost eight or ten bucks. A quarter inch bit from Home Depot is probably a dollar forty nine for a reason.
If you want a really good bit, you have to find an American made Cobalt bit. But you may find that Platypus first.
Last edited:
Jeep Wrangler owner here...............Paul I feel your pain. I recently spent $600 to have a $30 part replaced. My jeep was having trouble with the climate control. Turns out theres a small actuator under the dash that changes the poisition of the doors in the tubes so you can go from defrost to cabin heat, or AC. Had to have the whole drivers side of the dash removed to get to a part that was only the size an English muffin. Took close to 5 hours to replace the actuator that was held in place with only 2 screws.
P.S. anyone considering buying a jeep, dont' do it! They are JUNK!!!!!
P.S. anyone considering buying a jeep, dont' do it! They are JUNK!!!!!
I am convinced they do this so you have to pay the high cost of getting something replaced or fixed.
Paul B
NJRC Member
Paintman. All those things used to be controlled by a simple vacuum hose. I once had to replace the heater core on a Cadillac. Probably in the 70s when they weighed as much as an M-60 tank. I had to take the front fender off along with half the front end.
It's disgusting that we can't make the simplest things any more. I still have my ball joint fork but I haven't used it in maybe 40 years. I made a lot of money with that simple thing. I bet very few, if anyone on here under about 50 even knows what that is for.
As a younger person I always fixed my own car and even now no one has ever touched one of my cars, boat or appliances except for lately a couple of times when I just wasn't strong enough or didn't have the right "computer" tool for it.
Now that I am going for a new shoulder in a few weeks that arm doesn't work to well and I had some Jiboni put rear rotors on my car. A simple 15 minute job with less than a hundred bucks parts. He charged me over $600.00 which is insane. I don't know how people pay for these things. Such a simple job that you only need a jack and two working arms to do. Drives me crazy. :confounded-face:
My boat needed some oil in the reservoir for the power trim.
.jpeg)
The hydraulic pump was all the way back in the bilge behind the port engine and Houdini couldn't get to it or even see it. So I called "SeaRay" to ask them how to access it. They told me that I had to cut a 10" hole through the deck or the floor of the boat to get to it. Like Really!!!. Is anyone stupid enough to do that. I told him that he should tell the engineer who designed it to call the engineering school he went to and see if he could get his money back.
I had to remove two very big boat batteries, the water tank, water heater, valve cover and alternator, then snake my Svelte, muscular, sinewy body in there to see the thing which was sitting in a pile of rust. The big, steel bracket the pump used to be bolted to disintegrated to dust so I didn't have to remove it as there was nothing to remove.
Out of all the materials they could have made a bracket of that was designed to sit in warm salt water forever they used steel. OK they painted it.
Wood from Home Depot would have been better. I removed the thing along with the hoses and wiring and moved it using longer hoses to a place that was accessible near the front of the engines so any Human Being can work on it.
For a bracket I used 1/2" acrylic which will last longer than the pyramids and it is cheaper than the $125.00 they wanted for a new bracket. The boat had two of those pumps so I had to do it twice.
If I had that "engineer" in my hands I would have given him ich.
It's disgusting that we can't make the simplest things any more. I still have my ball joint fork but I haven't used it in maybe 40 years. I made a lot of money with that simple thing. I bet very few, if anyone on here under about 50 even knows what that is for.
As a younger person I always fixed my own car and even now no one has ever touched one of my cars, boat or appliances except for lately a couple of times when I just wasn't strong enough or didn't have the right "computer" tool for it.
Now that I am going for a new shoulder in a few weeks that arm doesn't work to well and I had some Jiboni put rear rotors on my car. A simple 15 minute job with less than a hundred bucks parts. He charged me over $600.00 which is insane. I don't know how people pay for these things. Such a simple job that you only need a jack and two working arms to do. Drives me crazy. :confounded-face:
My boat needed some oil in the reservoir for the power trim.
The hydraulic pump was all the way back in the bilge behind the port engine and Houdini couldn't get to it or even see it. So I called "SeaRay" to ask them how to access it. They told me that I had to cut a 10" hole through the deck or the floor of the boat to get to it. Like Really!!!. Is anyone stupid enough to do that. I told him that he should tell the engineer who designed it to call the engineering school he went to and see if he could get his money back.
I had to remove two very big boat batteries, the water tank, water heater, valve cover and alternator, then snake my Svelte, muscular, sinewy body in there to see the thing which was sitting in a pile of rust. The big, steel bracket the pump used to be bolted to disintegrated to dust so I didn't have to remove it as there was nothing to remove.
Out of all the materials they could have made a bracket of that was designed to sit in warm salt water forever they used steel. OK they painted it.
Wood from Home Depot would have been better. I removed the thing along with the hoses and wiring and moved it using longer hoses to a place that was accessible near the front of the engines so any Human Being can work on it.
For a bracket I used 1/2" acrylic which will last longer than the pyramids and it is cheaper than the $125.00 they wanted for a new bracket. The boat had two of those pumps so I had to do it twice.
If I had that "engineer" in my hands I would have given him ich.
Paul B
NJRC Member
This morning before 6:00 was so beautiful that after my walk I took my Jeep on the beach and collected 50 gallons of NSW. It was so clear and calm that I don't have to strain out seaweed or do anything to it except heat it a little and added a little ASW as it is a little weak like 1.014 The temperature is almost 75 degrees.
I took this just before I collected water. Just beautiful
I tried to get some of that "red" water just below the sun.
The temperature is almost 75 degrees.I took this just before I collected water. Just beautiful
I tried to get some of that "red" water just below the sun.
Paul B
NJRC Member
The beach behind my house is all rocks like all Long Island Sound beaches. I would mush rather walk on a rocky beach than our south shore beaches which are just pure white sand which I find very boring. You never see anything interesting on a clean sandy beach although swimming is probably better there.
I also did almost all my SCUBA diving on the Sound because just like in a reef tank, fish prefer rocks to sand.
I also did almost all my SCUBA diving on the Sound because just like in a reef tank, fish prefer rocks to sand.
Paul B
NJRC Member
This morning on my beach walk it was very windy so the sea was rough. These horse shoe crabs have been on Earth for 100,000,000,000 years and they haven't yet learned not to go into shallow water on a windy day where they will get thrown up on the beach and their tail spine will be useless to turn them over because it only wotks under water. I rescued about a dozen today. Like Really!!!
