Here' the journal for my new build. I am hoping this will be it for a few years. My first reef tank, a 75g in the basement has been doing well so we decided to setup a show tank in the family room. I will be using most of the equipments from the current 75g setup. A few things worth mentioning are:
The tank - it's a DSA 105 rimless with black stand.
Lighting - ATI LED Powermodule.
Pump - I will be using Jim's used DC 10500 pump.
After the tank is filled with water I started feeling nervous about it. I haven't read any negative reviews on this tank on the web but I have never had a rimless tank before. With the water line only a little over 1 inch below the rim it just looks like something going to happen any time. I hope this feeling will go away.
Overflow - There are two drains for the overflow, both are 1". I will be running about 400gph on the return. I have it setup as Herbie for the moment but I am not sure. With the emergency drain 100% blocked it will cause a flood. I will try dual durso and see how noisy it is. With about 200gph thru each drain I hope it's not too bad. And with durso each drain should handle 400gph easily.
Plumbing - Flexible PVC will be used on the main runs. It's so much easier than rigid PVC. Also I am not using Unions at all. The 1" union actually has an opening < 1". Instead of unions I use 1" threaded adapters which allow disassembling for cleaning if needed. The drains will be fitted with strainers so I don't expect any blockage.
The tank - it's a DSA 105 rimless with black stand.
Lighting - ATI LED Powermodule.
Pump - I will be using Jim's used DC 10500 pump.
After the tank is filled with water I started feeling nervous about it. I haven't read any negative reviews on this tank on the web but I have never had a rimless tank before. With the water line only a little over 1 inch below the rim it just looks like something going to happen any time. I hope this feeling will go away.
Overflow - There are two drains for the overflow, both are 1". I will be running about 400gph on the return. I have it setup as Herbie for the moment but I am not sure. With the emergency drain 100% blocked it will cause a flood. I will try dual durso and see how noisy it is. With about 200gph thru each drain I hope it's not too bad. And with durso each drain should handle 400gph easily.
Plumbing - Flexible PVC will be used on the main runs. It's so much easier than rigid PVC. Also I am not using Unions at all. The 1" union actually has an opening < 1". Instead of unions I use 1" threaded adapters which allow disassembling for cleaning if needed. The drains will be fitted with strainers so I don't expect any blockage.